background image

3491 Mission Oaks Blvd.  •   PO Box 6009  •   Camarillo, CA 93011  •   1-800-520-0882

Harbor Freight Tools Emission Control 

Defects Warranty Provisions

1.  Length of Coverage

HFT warrants to a first retail purchaser and each 

subsequent purchaser that the engine is free from 

defects in materials and workmanship that cause the 

failure of warranted parts for a period of two (2) years 

after the date of delivery to the first retail purchaser.

2.  No Charge Repair or Replacement

Repair or replacement of any warranted part will be performed at 

no charge to the owner if the work is performed through a warranty 

station authorized by HFT.  For emissions warranty service, 

contact the HFT Customer Service Department at 1-800-520-0882.

3.  Consequential Damages Coverage

Coverage under this warranty shall also extend to the failure 

of any engine components caused by the failure of any 

warranted part while it is still covered under this warranty.

4.  Coverage Exclusions

Warranty claims shall be filed in accordance with the provisions 

of the HFT warranty policy explained in the box at the top of the 

previous page.  HFT shall not be liable for any loss of use of 

the engine, for any alternative usage, for any damage to goods, 

loss of time, or inconvenience.  Warranty coverage shall also be 

excluded for any part which fails, malfunctions, or is damaged 

due to failure to follow the maintenance and operating instructions 

set forth in the Owner’s Manual including, but not limited to:
a)  Use of parts which are not authorized by HFT
b)  Improper installation, adjustment or repair of the engine or of 

any warranted part unless performed by an authorized warranty 

center

c)  Failure to follow recommendations on fuel use contained in the 

Owner’s Manual

d)  Improper or inadequate maintenance of any warranted parts
e)  Repairs performed outside of the authorized warranty 

service dealers

f) 

Alterations by changing, adding to or removing parts from 

the engine.

5.  Service and Maintenance

Component parts which are not scheduled for replacement 

as required maintenance or are scheduled only for regular 

inspection to the effect of “repair or replace as necessary” 

are warranted for the warranty period. Any warranted part 

which is scheduled for replacement as required maintenance 

is warranted for the period of time up to the first scheduled 

replacement point for that part.  Any replacement part, provided 

it is equivalent in durability and performance, may be used 

in performance of maintenance or repairs.  The owner is 

responsible for commissioning a qualified technician/mechanic 

to perform all required maintenance, as outlined in the 

Inspection, Cleaning, and Maintenance section in this manual.

6.  Warranted Parts

1)  Fuel Metering System

i) 

Carburetor and its internal parts.

ii)  Fuel pump (if so equipped).
iii)  Cold start enrichment system.

2)  Air Induction System

i) 

Intake pipe/manifold.

ii)  Air cleaner.

3)  Ignition System

i) 

Spark plug.

ii)  Magneto ignition system.

4)  Catalyst System (if so equipped)

i) 

Exhaust pipe stud.

ii)  Muffler.
iii)  Catalytic converter (if so equipped).

5)  Miscellaneous Items Used in Above Systems

i) 

Vacuum, temperature and time sensitive valves and 

switches.

ii)  Hoses, belts, connectors, and assemblies.

Содержание 69747

























Отзывы: