Page 4
For technical questions, please call 1-800-444-3353.
SKU 47906
when wet or standing on damp or wet
ground. Exercise caution when work-
ing with electrical equipment in the
presence of water to maintain your
personal insulation to avoid shock.
Use gFci (ground Fault circuit inter-
rupter) outlets when using this pump.
WARNING: The brass components
20.
of this product contain lead, a chemi-
cal known to the State of California to
cause birth defects (or other reproductive
harm). (California Health & Safety code §
25249.5,
et seq.
)
WARNING: Handling the cord on this
21.
product will expose you to lead, a chemi-
cal known to the State of California to
cause cancer, and birth defects or other
reproductive harm. Wash hands after
handling.
(California Health & Safety Code §
25249.5,
et seq.
)
the warnings, cautions, and instruc-
22.
tions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
it must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
UnPAcKing
When unpacking, make sure the item is
intact and undamaged. If any parts are miss-
ing or broken, please call Harbor Freight Tools
at 1-800-444-3353 as soon as possible.
SPEciFicAtiOnS
Power Requirements 120 V~, 60 Hz, 1 HP
Motor Speed
3400 RPM
Discharge/Intake
1” NPT
Max. Flow
900 GPH
Max. Suction Lift
26’
Max. Total Head
164’
Tank Size
5 Gallons
Pump Body Material
Stainless Steel
Cut-in Pressure
20 PSI
Cut-out Pressure
50 PSI
note:
Performance of this pump (if powered
by line voltage) may vary depending on
variations in local line voltage. Extension
cord usage may also affect pump perfor-
mance.
rEV 07g; 08k; 09c
