Pacific Floorcare S-24, Инструкция по эксплуатации и каталог запасных частей

Страница: 22 / 80

RETURN TO
TABLE OF
CONTENTS
- 18 -
RECOVERY SYSTEM RECOVERY SYSTEM
RECOVERY TANK
To drain and rinse the recovery tank:
1. Lift the hose off the holder and lower the hose end to the desired drain location.
2. Remove the press-fit cap from the drain hose and squeeze the restriction collar to control the flow.
3. As the tank drains, lift the recovery tank lid to the fully open position.
4. Thoroughly clean and rinse out the sediment from the bottom of the tank with a clean water hose.
• Periodically use cleaner and sanitizer with a cloth or sponge to prevent mold and mildew.
5. Inspect and clean the debris tray and the vacuum mesh filter screen and ball float system.
6. Leave the lid open to dry
1 3
4 5 6
2
OPTIONAL TANK TREATMENT
The Tank Treatment System (TTS) utilizes Bromine tablets (typically used in pools and spas) to kill the odor-
causing bacteria in the tank. To ensure that the TTS is prepared to treat your recovery tank:
1. Lift the debris tray out and pinch the two tabs sticking through the underside of the tray.
2. Check the size of the Bromine puck. Replace it when it is approximately 25% of its original size.
3. Press the TTS holder and bromine puck back into the debris tray.
CAUTION:
Use Bromine only! Do not use chlorine!
Chlorine can interact with ammonia-based detergents to
cause harmful fumes.
1 2 3