Pacific energy UL 1482, Инструкция по установке и эксплуатации

Страница: 10 / 24

10 SINS.BODYC 230311-20
Surround
Securing
Flange
Screws
(3 each
side)
SCREWS
TAB
Surround screw at
Top of slot
Securing Flange
Screw at bottom
of slot.
8) Remove the surround securing fl anges from the fi replace
(Fig.13) and relocate to the pre-assembled surround.
9) Slide the securing fl ange up so that the fastening screws are
at the top of the slots in the surround. (Fig.14 & 15)
7) Remove wing screws on each side of the Bay top and set
Bay top aside to prevent damage. (Fig. #12).
“Wing” Screw
10) Slide the pre-assembled surround behind the ash lip. Ensure
that the electric supply cord is located in the slots in the base
of the surround.
11) Once the surround is fastened to the insert, in order to maximize
heated air discharge efficiency, the surround can be pulled
upward so that the fastening screws are at the lowest end of
the surround securing fl ange slots.
(Fig.16)
12) Push the entire appliance back until the surround assembly
is in contact with the fi replace structure.
13) Replace the front panels ensuring that the tabs (Fig.17) on
the lower edge of the panels are located into the slots in the
ashlip, secure with screws (Fig.11).
14) Position the decorative bay top onto the fi rebox top. Align
and refasten the wing screws.
Fig. #12
Fig. # 15
Fig. # 17
Screw at top
of slot.
Fig. # 13
Fig. # 14
Fig. # 16