Pacific energy TOFINO i20, Руководство по эксплуатации

Страница: 9 / 32

Figure 6: Temperature in
celcius.
Figure 7: Temperature in
fahrenheit.
Figure 8: Key lock icon.
Figure 5: On Off switch for SIT units.
i20 TOFINO
Temperature indication Display
With the system in the “OFF” position, press the Thermostat Key and the
Mode Key at the same time. Look at the LCD screen on the transmitter to
verify that a C or F is visible to the right of the Room Temperature display
(Figure 6 and Figure 7).
Turn on the Fireplace
With the system OFF, press the ON/OFF Key on the remote transmitter. The
remote transmitter display will show some other active Icons on the screen.
At the same time the Receiver will activate the Heater. A single “beep” from
the Receiver (module) will confirm reception of the command.
Turn off the Fireplace
With the system ON, press the ON/OFF Key on the Remote transmitter.
The Remote transmitter LCD display will only show the room temperature
(Figure 6 and Figure 7). At the same time the Receiver (module) will turn off
the Heater. A single “beep” from the Receiver confirms reception of the
command.
Manual Bypass of the Remote System
If the batteries of the receiver or remote transmitter are low or depleted, the
Heater can be turned off manually using ON/OFF switch located on the
left hand side of the backing plate (Figure 5). This will bypass the remote
transmitter.
Key Lock
This function will lock the keys to avoid unsupervised operation. To activate
this function, press the MODE and UP keys at the same time. The lock icon
will appear (Figure 8). To de-activate this function, press the MODE and UP
keys at the same time.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control the comfort level in a room.
To activate this function, press the Thermostat key (Figure 1). The LCD
display on the transmitter will change to show that the room thermostat
is “ON” and the set temperature is now displayed (Figure 9). To adjust
the set point, press the up or down arrow keys until the desired set point
temperature is displayed on the LCD screen of the transmitter.
Room Temperature
Set Temperature
Figure 9: Room temperature control.
9
5055.980-A
150317 -32