PACIFIC CYCLE Kulana Tandem, Руководство пользователя

Страница: 23 / 40

seat post
pinch bolt
minimum
insertion mark
seat tube bracket
2
3
19
Adjust the Saddles
Failure to insert the seat stems beyond the Minimum
Insertion line may cause the stem to break resulting
in damage to the stem, loss of control, falling, serious
injury or death. Insert the handlebar and seat stem
into the frame until the Minimum Insertion Mark is
not visible .
Insufficient bolt tightness on the seat stem may
result in the seat slipping, loss of control and serious
injury or death . Be sure the seat is locked and capable
of supporting the weight of the rider before using the
bicycle .
For proper seat height: Set the saddle height to
obtain the most comfortable position for pedaling
efficiency. The seat height should be set in relation
to the riders leg length . There should be no leg strain
from over extension and hips should not rock from side
to side when pedaling . The correct saddle height will
allow the knee to be slightly bent when placed on a
pedal at it’s highest point. The opposite leg should be
almost straight .
!
WARNING!
Tools: 5 mm allen wrench
1. Using a 5 mm allen wrench, loosen the two pinch
bolts on the seat tube bracket .
2. Adjust the saddle height to the proper position
according to the riders height . The saddle stem
Minimum Insertion mark should not be visible .
3. Using a 5 mm allen tighten the two pinch
bolts on the seat tube bracket .