Pacific Crest ADL Sentry Скачать руководство пользователя страница 5

5

ADL Sentry User Guide

WARNING

 – Charge and use the rechargeable battery only in strict accordance with 

the instructions. Charging or using the battery in unauthorized equipment can cause an 
explosion or fire, and can result in personal injury and/or equipment damage. To prevent 
injury or damage: 

•  Do not charge or use the battery if it appears to be damaged or leaking.
•  Charge the battery only in a Trimble product that is specified to charge it. Ensure that you 

follow all instructions that are provided with the battery charger. 

•  Discontinue charging a battery that gives off extreme heat or a burning odor.
•  Use the battery only in Trimble equipment that is specified to use it. 
•  Use the battery only for its intended use and according to the instructions in the product 

documentation.

CAUTION – 

Do not

 use any battery charger as a power supply for any radio. This may damage 

the radio. 

Do not

 recharge any battery while it is connected to a radio.

Tranmission Rules and Regulations

 Licensing requirements

It is the responsibility of the owner to comply with applicable rules and regulations 
concerning the operation of a radio transmitter. In the United States, the FCC regulates 
the licensing of this equipment.  The ADL Sentry transceiver uses extended frequencies 
and may contain functions that are not operational in the United States and its 
territories. Users should check with the radio authority of the country of operation for any 
restrictions that might apply.

Application for a license is made by submitting FCC Form 600 along with evidence of 
frequency coordination (if required) and applicable fees. Similar licensing requirements 
exist worldwide. Penalties for broadcasting without a license can be severe, and may 
include the confiscation of your radio.

For more information, contact our customer service department. 

WARNING:

 Always obey local licensing requirements and restrictions. It is illegal to transmit 

in the United States while CSMA is turned off. CSMA is not required within the European 
Union and should be turned off.

 Equipment compliances

The radios have been tested and found to comply with Parts 15 and 90 of Title 47 of the 
Code of Federal Regulations. They have also been tested and found compliant for type 
certification and approval in many other countries worldwide.

For more information concerning our worldwide compliances, contact customer support.

 Being part of the RF community

Operation of a licensed radio product makes you a member of the RF community. 
Be aware that virtually all frequencies licensed are provided on a shared basis with 
other users. Each frequency dedicated specifically to RTK surveying activities has 
certain restrictions and limitations. For complete information, refer to the appropriate 
documentation from the licensing agency in your country of operation, e.g., Part 90, Title 

Содержание ADL Sentry



























Отзывы: