11
ADL Sentry User Guide
Configuring the Radios
ADLCONF configuration software
ADLCONF is the software application for configuring and troubleshooting all Advanced
Data Link (ADL) radios. Running the ADLCONF software on a computer attached
through a serial cable to an ADL radio enables you to check the status of the radio, enter
receive-only channel tables, and set radio parameters such as channel bandwidth and
output power. Channel tables for transmission of data must be obtained from authorized
Pacific Crest dealers. If your radio did not come with a channel table already installed, you
can obtain one from your dealer and then import it using the ADLCONF software.
The latest version is available for free download from
www.PacificCrest.com.
The
ADLCONF User Guide
is also available on the Pacific Crest website. A user guide that
describes how to configure the ADL Sentry radio is available by running the ADLCONF
software and then selecting
Help
/
User Guide
.
Factory default settings
To return the radio to its factory default configuration, use the ADLCONF software. Click
Restore Factory
to the right of the screen and then click
Program
. The following table
shows the factory default settings:
Description
Default Setting
Device Status
Battery status
Channel/Frequency
Channel No. and frequency (MHz)
Channel Tx Frequency
Channel No. and frequency (MHz)
Data Protocol
Transparent EOT (End of Transmission)
Radio Link Rate
9600
Operation Mode (Trimble protocol)
Base/Rover
Sensitivity
High (Rover)
Rx LED Meaning
Signal Received
Serial Baud
38000
Advanced Menus
Hide
CSMA
On
Security Code
Off
Edit Configuration
Enabled
Scrambling
On
Forward Error Correction
On
Содержание ADL Sentry
Страница 1: ...ADL Sentry User Guide...