Part 2 - Getting Started
25
Camera Registration
Once Network Setup Wizard is complete, the system
will automatically enter Camera Registration mode and
scan for cameras connected to the NVR.
1
2
3
4
5
1
Camera Scan Button
2
Camera View Menus
3
Camera List Area
4
Video Display Area
5
Apply/Cancel Buttons
Camera Scan Button
You can scan and search and register cameras
that were not detected automatically or third party
cameras.
1
Pressing the
Scan
button displays the following
submenu.
Ř
Rescan
: Scans for DirectIP™ cameras that were
not scanned automatically.
Ř
Third Party Scan
: Used to manually scan for
third-party cameras that cannot be recognized by
the auto scan feature.
Ř
Auto Detection
: Activated in Live mode.
Automatically notifies the user of unregistered
DirectIP™ camera connections.
2
From the
Protocol
drop-down list, select the
protocol used by the network device you wish
to search for (Axis, Panasonic WV, or Onvif
Conformance).
Even if the network device uses a protocol
supported by the NVR, the device itself may not
be visible for scanning and registration by the
NVR. For more information about supported
network devices and models, contact your
retailer.
3
From the Mode drop-down list, select
Auto Scan
(LAN)
or
IP Address Scan
.
4
Select
Scan
to commence scanning.
Ř
Only cameras that are connected to the NVR
via VIDEO IN ports can be scanned and
registered.
Ř
Selecting
Auto Scan (LAN)
as the mode
scans for network devices matching the
selected protocol.
Ř
Setting
IP Address Scan
as the mode
scans for network devices matching the
specified address or falling under the specified
address's range. By specifying an IP address,
you can also specify which port to use with
the Remote Admin feature.
Ř
If
Auto Scan (LAN)
fails to recognize a
network device, try using
IP Address Scan
instead.
