manualshive.com logo in svg

PACH & COMPANY AeGIS 4000, Инструкция по установке и программированию

Поделиться
Скачать
PACH & COMPANY AeGIS 4000 Скачать руководство пользователя страница 12

9. 

Pach and Company warranty does not guarantee any product, new or repaired, to be free of operation error or

service interruption in any way during the course of daily product operation 

10. Pach and Company 

is not responsible for time, travel, and/or labor costs of any distributor and/or dealer-installer

,

including but not limited to, any expenses to install, uninstall or reinstall hardware/software/firmware related to warranty
issues, product enhancements, or product failures. 

IMPORTANT REPAIR NOTE:

Pach and Company will perform a factory physical evaluation of all products submitted for

repair at receipt of item, and reserves the right to decline repairs after said physical evaluation.  In the event a returned 
product is deemed ineligible for repair; the product will be returned to sender via common carrier ground at Pach and
Company expense.   

Содержание AeGIS 4000






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды