90
Manual Unlock or Lock. 0 lock and 1=unlock
91
Talk-time 10-90 seconds. Default setting 60 seconds
92
Door Open Interval 01-90 seconds. Default setting 12 seconds.
93
Lock-out count 3-9. Default setting at 3.
94
Auxiliary Mode. 0 disable, 1 and 2=enable. See owners’ manual for more detail. Default setting disable.
95
Alarm Mode. 0=local and 1=remote. Default setting local.
96
System Answer Mode. 0=disable and 1-9=enable and system answer on 1-9 rings. Default as d
97
Do not Disturb Mode. 0=disable and 1=enable. Default setting disable.
98
Select Initiating Premise Call Key (# or
∗
). 0=# and 1=
∗
. Default setting #.
99
Set the memory to factory default. 99# (Two long beeps) then 0# (One short beep) to cancel or 1# (three
short beeps) to set to factory default.
System’s Operations
Refer to owners’ manual for more detail.
Description
Action
To initiate call from the system
Press #
To hang up call from the system
Press
∗
To provide access to visitor.
Press 9
To use call waiting feature.
Press 0 to put existing call on hold and transfer to the incoming call.
To use 4-digit personal access code.
Press
∗
then 4-digit code.
To enable non-indexed call forwarding
locally.
Programmed the phone number on Index 70.
To delete non-indexed call forwarding
locally.
Press
∗
and 0 simultaneously then release then press 70 then #, hear three short beeps.
To enable indexed call forwarding
locally.
Press
∗
and 0 simultaneously then release then press 71, 72, 73, 74 or 75 then #, hear three short
beeps.
To disable indexed call forwarding
locally.
Press
∗
and 0 simultaneously then release then press 70 then #, hear three short beeps.
To activate Automatic Call Forwarding
locally.
Program a phone number on Index 71. Call will be forwarded to the number programmed on Index 71 if
no answer at the premise in 15 seconds. If you use different index number refer the owners’ manual.
To Unlock Cycle door or gate remotely
via premise phone.
Press ## then 9 or Press
∗∗
then 9
See function code 98 setting.
To Unlock Hold door or gate remotely via
premise phone.
Press ## then 8 or Press
∗∗
then 8
See function code 98 setting.
To Lock door or gate remotely via
premise phone.
Press ## then 0 or Press
∗∗
then 0
See function code 98 setting.
To call from premise phone to the
system and talk to visitor.
Press ## then
∗
or Press
∗∗
then
∗
See function code 98 setting.
Pach & Company
941 Calle Negocio
Phone: 1-888-678-7224
www.pach-co.com
San
Clemente, CA 92673
Fax: 949-498-6879
