manualshive.com logo in svg

PaceSaver Scout RF, Руководство пользователя

Поделиться
Скачать
PaceSaver Scout RF Скачать руководство пользователя страница 22

20    BOSS 4.5, RF, P3 & P4 OWNERS MANUAL

Seat Assembly Operation

The power wheelchair comes with removable/height adjustable arms. These arms are designed to provide 
support for your arms while seated on the wheelchair, and for assistance when getting on and off of the 
wheelchair.  Persons with no use of their legs, or no ability to transfer weight to the fl oor should seek other 
means of assistance (slide board, helper, etc.) when transferring in and out of the wheelchair.  Arm failure will 
result if excess weight is applied to the arm.

Width adjustable arm adjustments

1.  Loosen the black knobs under the edge of the seat. Rotate counter  clockwise to loosen.
2.  Slide the armrests in or out as needed.
3.  Tighten the black knobs. Rotate clockwise to tighten.
Should  you wish to remove the armrests, simply pull them out when the knobs are loose. Remember to 
tighten the knobs to avoid their loss.

Seat Height Adjustment
NOTE:

 The Boss 4.5 is shown in the photo. The seat height is adjusted on the Scout RF-P3 & P4 in the same 

manner.    
1.  Remove  the seat assembly by unpinning the seat and lifting the 
seat assembly  straight up.  Set aside.
2.  Locate  the seat height adjustment bolts and nut
     located on the post where pins were  removed.
3.  Remove the bolt, nut, and washers.  Take note of
     their  position

 

in order to correctly  replace them.

4.  The seat height post will now move up and down.
5.  Position the seat height to new desired position.
6.  Replace  the washers,  bolt,  and nut in their proper  order.  
     Tighten until all play is  eliminated.
7.  Replace the seat assembly and test the new height.

It  is recommended that the seat assembly be positioned at the  lowest 
comfortable seat height. The power wheelchair's stability will be 
improved with a lower height.

WARNING:

 For units with the optional Power Seat, only drive the  wheelchair when the power 

seat is in the lowest position to avoid tipping and serious injury.  If you are unable to follow this 
instruction, consult your dealer for alternatives.

ASSEMBLING THE WHEELCHAIR

The  power wheelchair's easy separation makes it very convenient to disassemble 
and assemble the unit.  Complete disassembly can be accomplished in seconds 
WITHOUT tools.  The procedure is as follows.
  
Make sure the power button has been placed in the off (no lights) position.  
Remember, it should already be in the OFF  position since it was placed there 
when you last got  off the wheelchair.  Disconnect the power cord located at 
the rear of the seat on the seat bracket, unpin the seat at all four points,  lift the 
seat assembly up  and remove.  Lift off the cover while passing the cable and 
connector through the hole in the cover.
        
Disconnect  each  battery by  depressing the tab on each battery plug to unplug 
the cable.   Remove  both batteries.

Содержание Scout RF









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды