6
Figure 1
Purse Lock
Clip
Shown Closed
ASSEMBLY INSTRUCTIONS
Assembly
Step One:
(see figure 1)
Carefully place the bottom of the handlebar (1) on the frame (2) so the two
holes in the plate at the bottom of the handlebar line up with the holes in the
frame
.
Insert the 3.5” carriage bolts (3) through the handlebar and the frame.
Install a 1/4-20 kep nut (4) to each carriage bolt to keep the handlebar in place.
Follow the same procedure for the other side of the handlebar. Do not tighten
any nuts until both sides are bolted in place.
CAUTION: Make sure the treadmill is NOT plugged into the electrical outlet until assembly is competed.
Step Two:
(see figure 2)
With the handlebar bolted in place, plug the black wire harness (5) into the socket (6) on the power supply board.
Twist open the purse clip at (7a) insert the wire harness (5) and secure the purse clip. Confirm the wire harness is
positioned as shown at point 5 above. Follow the same procedure for purse clip (7b).
Figure 2
7a
6
5
7b
