Page 12 of 23
The memory button can be used to store and quickly return to a preset
magnification and focus setting. This function is useful if a video
measurement system is used. To store the current magnification and gain
setting, press and hold the MEMORY button for three seconds. The camera
will beep to indicate that the current setting has been stored in memory. To
restore the magnification and gain setting from memory, press and release
the MEMORY button. The camera magnification will quickly return to the
setting stored in memory.
Manual gain control is enabled by placing the mode switch in the “GAIN”
position. Press the rocker in the + direction to increase the gain. Press the
rocker in the - direction to decrease the gain. Press the rocker once for each
step on gain. After setting the gain, the rocker can be switched to the ZOOM
mode without losing the manual gain setting. Automatic Gain Control is
enabled if the mode switch is set to GAIN and then back to ZOOM without
using the +/- rocker switch.
As shipped from the factory, the startup setting stored in memory is 14x
magnification and auto focus mode.