4
AIR HOSE CONNECTION
The Traditional Method of attaching the Air Hose from the power source is best
suited for use with the TJ-70.
NOTE
Ensure that no Air Hose is connected to the
SNAP-VAC
Port when using
the TJ-70 handpiece. The TJ-70 Air Hose must be connected to the
Controllable
PRESSURE
Port. Attachment to both ports simultaneously
will cause a deterioration of performance.
TRADITIONAL CONNECTION
1. Connect the 137cm (54 inch)
length of Air Hose to the metal
tube in the back of the
handpiece.
2. Insert the ridged end of a male
quick connect hose mount
fitting (P/N 1259-0087) into the
free end of the 137cm (54 inch)
length of Air Hose.
3. Secure the Air Hose to the
cable assembly with cable clips (P/N 1321-0085-01).
4. Attach the remaining end of the 137cm (54 inch) length of Air Hose (with
attached male fitting) to the power source Controllable
PRESSURE
Port.
5. To avoid confusion among handpieces, PACE recommends the use of
colored markers (P/N 6993-0136 Cable Marker Kit) to identify the Air Hose
connected to the handpiece. Attach any two like colored markers, one to
each end of the Mini ThermoJet Air Hose. Any Air Hose attached to
another handpiece should contain markers of another color.