Pace TDC775D, Руководство пользователя

Страница: 44 / 63

43
MAKING HDTV-DISPLAY SETTINGS
About HDTV-display settings
You need to set the appropriate aspect (width-to-height) ratio and TV display (screen resolution)
settings for HDTV. Higher screen resolutions result in better quality pictures, but the resulting picture
may not, in some circumstances, fill the TV screen. If this occurs, it should be possible to zoom the
picture in various ways (see page 45). An explanation of resolutions is on page 47.
In addition to the aspect and display settings, you can change: the “Auto Pillarbox” feature; the Closed
Captions settings; and the front panel display settings. You can also reset the HDTV-display settings
to the factory defaults.
Use the
L
,
R
,
U
,
D
and select buttons on the front panel to change the settings. Check and change
the settings by looking at the set-top’s front panel. You can also look at the on-screen menus,
although please note, in some circumstances these may not be visible.
Putting the set-top into “HDTV settings mode”
1. Make sure that the set-top is switched on.
2. Press the power button on the set-top, then within 1 second , press the
menu button.
The front panel displays “ASPt” as shown far right. Depending on the set-up, you
may also see the HD Power Menu, shown right, on the TV screen.
3. Once you have finished making changes (see pages 44 to 54), to remove the
HD Power Menu, and return to normal viewing, press the power button.
Pace Power Menu
TV Aspect Capability
TV Display Capability
Auto Pillarbox
Closed Captions
Front Panel Settings
Restore Defaults
power button.
menu button
front-panel display