26
CONNECTING THE EQUIPMENT (cont.)
About Set-up E: Using component video cables to connect a DVD player and an
HDMI TV
In this set-up, a DVD player is added to the basic set-up. In this example, the set-top and HDTV are
connected by an HDMI cable. The component video option is shown in Set-up H on page 31.
• If the set-top is connected to the HDTV by an HDMI cable, you can connect video directly
between the DVD player and HDTV. There is no need to loop the video through the set-top.
• This set-up assumes that the DVD player has component video output jacks and you make the
connection using three cables (9). If it does not have component video outputs, then you can
connect it to the HDTV using any spare baseband video or S-video input jacks on the HDTV.
• The audio connection from the DVD player can go directly to the HDTV, as shown by cables 10
on page 25 (provided that there are enough audio input jacks on the HDTV).
• If the HDTV’s audio inputs are limited, you can use the set-top’s baseband audio loopthrough
feature to loop the audio through the set-top. The set-top must be turned off for this audio
loopthrough to occur.
RF Cable TV
Cable Wiring Diagram E
Audio & Video
TDC775D
set-top
HDTV
Cable TV
RF
DVD
Player
HDMI or [DVI & Audio]
Содержание TDC775D
Страница 63: ......
