Pace TDC577X, Руководство оператора

Страница: 26 / 40

Check Suggested solution Further checks, if there is still a problem
Is there any sound?
YES
D
NO
R
Check that the audio cables are securely and
correctly connected. Check that you have not muted the sound on your set-
top and/or TV. Adjust the volume control on your set-top
and/or TV. If you are using a home theater receiver, check
it is set up correctly.
Can you hear stereo
sound?
YES
D
NO
R
First check that the program is likely to have
stereo sound (an old movie, for example, may
not be in stereo).
Check the TV Guide Setup Menu, Audio
settings (see page 21). The Stereo Output
may be set to “Mono”. Change it to “Stereo”.
If the TV is mono, you will only hear stereo sound if you
have a stereo audio amplifier and speakers or home
theater connected to the stereo VCR or set-top. This is
also the case if the stereo TV has only an RF input.
Can you see only regular
(analog) channels but not
any digital channels?
YES
R
The bypass feature may be turned on. Use
the Setup menu (see page 21) to turn the
feature OFF (make sure the word BYPASS
is not lighted on the front panel).
SOLVING PROBLEMS (cont.)