7
Xi3 (PX032ANI) USER GUIDE (501-3410500)
WARNINGS
Do not connect your set-top box (or any other equipment such as a TV or DVD player) to the power
supply until you have properly connected all the other cables.
Disconnect your set-top box from the AC power supply before you disconnect any other equipment from its
rear panel.
The only way to disconnect your set-top box from the AC power supply is to remove the AC power cord (or
switch the wall AC outlet switch, if present, to its OFF position). Your set-top box must therefore be installed
near the wall AC outlet, which should be easily accessible.
The cable input is designed for connection to a cable network only. You must not connect any other
equipment, such as a VCR, to this input.
Possible setups
In order for you to view programs broadcast in high-definition, your set-top box must be connected to a
suitable HDTV or computer monitor.
Your equipment should have been connected up by your installer. However, if you need to disconnect and
reconnect your equipment, read page 8.
The setup shown on page 8 makes efficient use of the connectors on your set-top box. However, depending
on your other equipment and the connectors on it, the person who installed your system may have chosen to
connect things differently.
CONNECTING THE EQUIPMENT
NOTE
Copy protection via an HDMI
secure link
The HDMI link between your set-top box and your HDTV should be a secure link. When your set-top
box is attached via an HDMI cable to an HDCP-compliant (High-bandwidth Digital Content Protection)
HDTV, the HDTV and set-top box negotiate a secure link, which allows your set-top box to transmit full
resolution video (picture) to your HDTV.
Not all HDTVs support HDCP. If your set-top box is connected to an HDTV that does not support it, the
following may be displayed:
Your HDTV does not support HDCP.
Please use the YPbPr component connection to watch TV.
The HDMI output is then disabled, so no picture is transmitted from this connector.
FIRST
DRAFT