©
2012 PACE Incorporated, Southern Pines, NC All Rights Reserved. Printed in the USA
www.paceworldwide.com
CHANNEL SELECTION
AUTOMATIC SHUTDOWN
LOWER TEMPERATURE LIMIT SETPOINT
10. The system enables the Automatic Shutdown
feature only when the Automatic Setback
feature is enabled. No additional steps are
necessary.
11. The Channel 1 LED is now lit signifying
that Channel 1 is ready for calibration.
Perform steps 12 through 21 to calibrate.
As channels change, repeat these steps
for each channel.
NOTE
All temperature limits are stored in
system memory in degrees °F
12. Press and release the Tip Temperature Set Key. The
Digital Readout will now display "L-X" (X = 1-9). This is
the stored value of the Lower Temperature Limit in
increments of 100°F. For example, if the "L-5" is
displayed, the lower limitis500°F.
3
