4
Thank you for choosing Charter Communications
4.
Set the Channel
(if using an HDTV, proceed to step 5)
a. Turn on your TV and tune it to channel 3.
b. Set the switch on the back of the DTA to channel 3.
Note: Some parts of the country use channel 4. If you do not have a picture after completing this step, you may need to
switch both your TV and the DTA to channel 4.
5.
Enable RF Remote Control Pairing
a. If two AA batteries are not already in the remote control, insert them now. If the TV is not on, turn it on.
b. Press
MENU
on the remote control.
c. Scroll to Remote Control in the Setup Menu.
d. Scroll to RF Remote Setup (Advanced) and press
OK/ENTER
OK
ENTER
to enable RF remote pairing.
Ensure you are NOT disabling the feature but enabling it.
e. Scroll to IR Remote Setup (Advanced) and press
OK/ENTER
OK
ENTER
to disable IR remote capabilities.
Ensure you are disabling the feature, NOT enabling it.
6. Program the Remote Control to the DTA
a. Point the remote control toward the DTA. Press and hold
SETUP
SETUP
until the All Power
LED turns red, then release.
b. Press and release
MENU
rapidly (up to 5 times) until the Remote Control Pairing overlay
appears on-screen.
c. Enter the three digit code that is displayed.
d. Once the device is paired, you will see “Success!” displayed on-screen. Press
OK/ENTER
OK
ENTER
to complete the process.
e. Test the remote to ensure the buttons now control the TV.
7. Program the Remote Control to the TV
(3 pairing options exist)
Option 1: Popular Brands Method
(chart on right)
a. Manually turn the TV on.
b. Press and hold
SETUP
SETUP
on the remote control until the
LED blinks twice.
c. Press the
TV Power
button on the remote control (top left).
d. Press and hold the corresponding digit button for the TV brand.
e. Release the digit button when the TV turns off. Setup is complete.
f. Test the remote to ensure the buttons now control the TV and DTA.
Option 2: Popular Brands Method
(Remote Control Manual)
a. Manually turn the TV on.
b. Press and hold
SETUP
SETUP
on the remote control until the LED blinks twice.
c. Find the manufacturer’s code for the TV from the Remote Control Manual supplied with the DTA.
d. Enter the first code for the brand of the TV. (A full listing of codes can be found at urcsupport.com).
e. Press the
TV Power
button on the remote control to test. If the TV turns off, setup is complete. If the TV
does not turn off, repeat steps 2 through 3 using the next code listed for the TV brand.
f. Test the remote to ensure the buttons now control the TV and DTA.