Pace Charter Скачать руководство пользователя страница 2

2

Thank you for choosing Charter Communications

This document details the steps a property manager should take to install Digital Transport Adapters (DTAs). DTAs are small, 
digital devices that will allow TVs to show programming delivered by Charter’s digital network. Any TVs that are not connected to 
a digital device (either a DTA or other digital receiver) will not be able to view programming from Charter’s network.  

DTAs that are connected to Charter’s network will remain active. However, when a DTA is disconnected from the network, it will 
timeout after 30 days and require remote activation from Charter when it is reconnected to the network.  

This DTA install process should take approximately 10 minutes per device. Please contact Customer Care at 

1-800-314-7195

 with 

any questions.

PrIor To beGInnInG The InsTAllATIon Process, ensUre ThAT yoU hAve These 

ITems for eAch Tv:

 

• 

DTA

 

• 

RF/HDMI cable(s)

 

• 

Power cord

 

• 

Remote control

 

• 

Batteries

 

• 

Velcro

 
 1.

 

Connect the DTA to the Cable Outlet

 

  a.  Please write the room or unit location where the DTA is being installed on the DTA label. 

 

 

  b.  Locate the cable that currently runs from the cable wall outlet to the back of the TV. Leave the cable connected  

 

    to the wall, but disconnect the other end from the back of the TV.

 

  c.  Reconnect this end of the cable to the “Cable In” input on the back of the DTA.

 

2. Connect the DTA to the TV

 

  a.  If you have an HDTV, connect the HDMI connector to the HDMI port on the back of the DTA to the HDMI input  

 

    on the back of your TV.

Charter Equipment. Do not                  Room #

remove from property. Contact

Property Management for return.

DTA front Panel

DTA back Panel

POWER LED

Lights when your

digital adapter is fully on

Power

DC80Xu HD

Pace

Power

HDMI

Ch 3/4

To TV

Cable in

CABLE IN

From cable

service provider

TO TV

RF output to

the TV

HDMI

Video and audio output

for 

digital

 HDTV*

POWER INPUT

Make this connection

last of all

CHANNEL 3/4

Switch for tuning your

digital adapter

 (if required)

HD service required for HD content. HDMI port can still be used for HDTVs

receiving SD service.

*

Содержание Charter







Отзывы: