10
Mi3 (IPW9001) USER GUIDE (501-2C14501)
OPTIONAL WIFI ADAPTER
Regulatory information for WiFi
NOTE
Users should be advised that high-power radars are allocated as
primary users (i.e. priority users) of the bands 5250-5350 MHz and
5470-5725 MHz and that these radars could cause interference and/or
damage to the LE-LAN device.
The device for operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel
mobile satellite systems.
Having a WiFi adapter fitted
Your set-top box has been designed to work with an 802.11ac 5 GHz WiFi
adapter. Contact your service provider about availability and installation.
Your home must have a 5 GHz wireless router or access point that
supports Wi-Fi Protected Setup (WPS) so that the adapter can correctly
associate with your wireless network.
If you wish to have this optional adapter, it may have been fitted in
advance. Alternatively, you can send your set-top box to a repair/service
center for a WiFi adapter to be professionally fitted.
Starting the WiFi connection
Consult the instructions for your wireless router or access point to find out
what you need to do to initiate a WPS WiFi connection.
When you have activated the WPS system on your router or access point,
press the button on the top of your WiFi adapter until the light around this
button flashes green.
This automatically connects your adapter to your wireless network using
WPS. When the WiFi connection is established, the light will be steady
green.
Note:
WPS will remain active for only a limited time to allow this pairing
process; please consult the instructions for your wireless router or access
point for information on the length of this limited time.
Disconnecting your WiFi adapter
You should not need to disconnect your WiFi adapter unless there is a
problem with it and you need to seek advice. In that case you need to see
the information on the label that is on your adapter.
WARNING:
Before you attempt to disconnect your adapter, switch off
your set-top box by pressing the
Power
button on the front panel.
Then disconnect your power supply unit from the wall AC outlet
To remove your WiFi adapter from your set-top box you need a Philips
(cross-head) screwdriver of a suitable size.
Unscrew the Philips-head screw on the end of your WiFi adapter and
gently pull the adapter away from your set-top box.
The label is on the underside of your WiFi adapter.
WiFi adapter
This cover is removed when the adapter is fitted.
WPS button on fitted WiFi adapter
Philips-head fixing screw on WiFi adapter
Pull adapter away from set-top box.
Part No: E4282C20400
Model No: AW500
Power: +5V DC 0.5A max.
Made in China
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including inteference that may cause undesired operation.
FCC ID: NQ8AW500
E222159
I.T.E.
35ZB
