- 5 -
System Operation
Main Menu
1.
Set Temperature
: Set the temperature by tapping the number. A numeric keyboard will appear that will
allow you to set the temperature from 20 - 200°C (68 - 392°F). Temperature can also be set by tapping
the + or - buttons.
2.
Actual Temperature/Offset
: Actual temperature shows internal temperature of the heater. Offset
shows how much the front and back heaters have been adjusted away from the Set Temperature. If the
unit is set to use the top or bottom sensor as active, this area will be blank.
3.
Temperature Curve
: The straight thin line indicates the Set Temperature. The bold line shows the
actual temperature reading for the currently selected sensor over the last 2 minutes.
4.
Top Sensor
: Shows the Top Sensor temperature when a thermocouple is in use. When not in use, will
display “N.C.” (Not Connected).
5.
Bottom Sensor
: Shows the Bottom Sensor temperature when a thermocouple is in use. When not in
use, will display “N.C.” (Not Connected).
6.
Icon Bar
: Displays key operational information icons during use. See page 6 for icon explanations.
7.
Password/Screen Lock Button
: Tap this button to lock the screen. On the Icon Bar a lock appears.
Tap the button again and enter password to unlock.
8.
Device Settings Menu Button
: Tap this button to open main Device Settings Menu screen. See page 8
for full explanations.
9.
Power Meter Button
: Tap the button to set the power level of the preheater. Options are 1600W or
800W. The meter shows the duty cycle or power level at which the heater is currently operating.
10.
Soft Shut-Off
: Tapping this button will turn the machine off but keep the internal cooling fans on.
Shutting the unit off via the circuit breaker on the back causes complete power loose to the unit and
may cause overheating as the residual heat built up inside the machine leaks out into the surrounding
circuitry.
11.
Increase (+) Temperature Button
: Tap button to increase set temperature (hold for quick- set).
12.
Decrease (-) Temperature Button
: Tap button to decrease set temperature (hold for quick- set).
1
2
3
4
5
8
6
7
12
9
11
10