Pace 405, Руководство пользователя, Страница: 10 / 18

10 Chapter 2 Setting up the video bridge
3. Press the WPS button on the back of the wireless access point. The WPS light on
the front of the access point will blink while the wireless set-top box connects to
the wireless access point.
After the set-top box connects to the access point, you will see the following message
on the television screen.
If the set-top box does not connect to the access point after a few minutes, see
“Connection issues” on page 14.
To add a second wireless set-top box, repeat the steps in this procedure.
WPS button
WPS
ETHERNET
RESET
POWER