Pace Technologies MEGA-T400A, Инструкция по эксплуатации

Страница: 11 / 36

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
MEGA - T400A
Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
2.0 Unpacking, Shipping and Installation
2.1 Unpacking Unit is delivered in a crate. Unpack and check for completeness of
parts.
Measures WxHxD: Approx. 51x51x75 - inches
Weight: Approx. 1000 lbs
2.2 Shipping When moving crate, lift from bottom. To move MEGA - T400A use
support bars provided with the machine.
The MEGA - T400A is constructed of sensitive electronic and
mechanical components. Do not drop.
!
Caution: Heavy equipment. Take care to avoid bodily injury.
6
(Installation continued on next page)
Machine includes support bars to lift machine and move
with the aid of a forklift. The casters are adjusted so the
saw can be rolled into place easier. After fixing the
position, retract the wheels on the caster.
Once the cutter is in place, remove the forklift support
bars so the tank will move inside the cabinet.
Casters set
for moving
cutter
Casters set
for stationary
support