OPTIONAL:
Stand-Less Installation
OPTION ONE:
The Dispenser may
be mounted directly on the wall
using screw anchors. These
screws can be inserted through
the back panel of the Dispenser
while it is opened as shown.
OPTION TWO:
It may also be
mounted on the wall with
double-sided adhesive tape and
then sealing the edges with
silicone sealant. Tape and sealant
not included.
2. Silicone sealant*
1. Double-sided adhesive*
ADDITIONAL INFORMATION
• Keep the U-shaped key in a safe place.
• Turn off the Dispenser before any maintenance or refilling.
• The drip tray should be wiped down periodically.
USER INSTRUCTIONS
10
9
STEP FIVE: Refilling The Reservoir Tank
A.
Turn off the Dispenser
using the on/off switch
located on the lower right
side of the Dispenser.
B.
Insert the U-Shaped Key
into the key holes on top of
the Dispenser to open it.
C.
Remove the Reservoir
Tank’s top cap.
D.
Fill the tank with hand
sanitizer gel or spray.
E.
Replace the cap, close
the Dispenser, and turn it
back on.
