Paccar Peterbilt 587 Скачать руководство пользователя страница 84

Страница: 84 / 239

SEAT BELTS AND THEIR PROPER USE

PART 5: SEAT AND RESTRAINT SYSTEMS

– 82 –

Y53-6032

(R05/10)

Some Other Safety Restraint Tips:

• Don’t wear belts over rigid or breakable objects in or

on your clothing. Such things might be eyeglasses,
pens, keys, etc. These could cause injury in an acci-
dent.

• Damaged belts in the cab or sleeper must be

replaced. Belts that have been stretched, cut, or worn
out may not protect you in an accident.

• Avoid catching belts in the doors or seat hardware.

They could be damaged.

• Don’t modify or disassemble the seat belts in your

vehicle. They won’t be available to keep you and your
passengers safe.

• Never bleach or dye seat belts; chemicals can

weaken them. Do, however, keep them clean by fol-
lowing the care label on the belts. Let them dry com-
pletely before allowing them to retract.

• If any seat belt is not working properly, see an autho-

rized Peterbilt dealer for repair or replacement.

Tether Belts

Tether belts are installed on suspension seats. They help
secure the seat to the floor to restrain it in case of a sud-
den stop or an accident.

WARNING!

Do not remove, modify, or replace

the tether belt system with a different tether
system. A failed or missing tether belt could
allow the seat base to fully extend in the event
of an accident leading to greater injuries or
death.

Y53-6032.book Page 82 Monday, May 24, 2010 3:37 PM

Содержание Peterbilt 587
















































































































































































































































Результаты поиска

Содержание Peterbilt 587

Отзывы:

Бренды по названию

Популярные бренды

Paccar Peterbilt 587, Руководство пользователя

Результаты поиска

Содержание Peterbilt 587

Отзывы:

Бренды по названию

Популярные бренды