Paccar Kenworth T170 Hybrid 2011, Руководство строителя

Страница: 160 / 179

Section 8
Electrical
8-32
12/11
Connecting the Liftgate Power
Follow these instructions to connect the liftgate to the third battery . See Figure 8-26 .
1 . Install the third battery .
2 .
Positive battery jumper cable with ring terminal breakout wire, item 17 in Table 8-9, page 8-30, should be
installed instead of item 2 .
3 . Install circuit breaker
4 .
Shorten the ring terminal breakout wire on positive battery jumper cable, item 17, to length as needed for rout -
ing to the circuit breaker . Install ring terminal, item 18 as needed . Route the wire per routing requirements in
Section 7 .
5 . Connect the ring terminal breakout wire to the circuit breaker .
The positive battery jumper cable with ring terminal breakout, item 17, and the ring terminal, item 18, are in Table 8-9,
page 8-30. These are available form PACCAR Parts.
The remainder of the wiring installation should be in accordance with the liftgate manufacturer’s installation instructions.
FIGURE 8-26. Liftgate Circuit Breaker Inside Battery Box