4.4 Charge session
4.4.1 Charge an EV
1. Park an EV in the parking space. Make sure that the connector of the EV charge cable can reach the
connector on the EV.
2. De-energize the EV.
3. Start the charge session. Refer to section 4.4.2.
4. Stop the charge session. Refer to section 4.4.3.
4.4.2 Start a charge session
1. On the touchscreen, select the applicable connector button.
Note:
If you skip this step, the EVSE selects the correct connector automatically when you
connect the EV charge cable to the EV.
2. Remove the EV charge cable from the EVSE.
3. Connect the EV charge cable to the connector on the EV.
4. Follow the instructions of the EV.
5. If the touchscreen shows a message to authorize the charge session, do the instruction that the
touchscreen shows.
The EVSE charges the EV and shows the progress on the touchscreen.
4.4.3 Stop a charge session
1. On the DAF EV press the green button If the vehicle does not have the green button, use the stop
button on the touch screen of the EVSE.
Note:
When the battery is full, the charge session stops automatically.
2. If the touchscreen shows a message to authorize the charge session, do the instruction that the
touchscreen shows.
3. Disconnect the EV charge cable from the EV.
Note:
In some cases, the EV locks the connector to the EV. To unlock the connector, obey
the instructions for the EV.
4. Install the EV charge cable on the EVSE.
21
