Complete Radio Replacement Kit with
Integrated Climate Control Retention for
2003-2007 Honda Accord
RPK4-HD1101
P
ifi A
C
ti
Page 7
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Rev: V8
Date: 081318
IMPORTANT!
The interface comes pre-programmed for the functions listed in the chart below and does not require programming unless you wish
to re-assign the SWC functions, or utilize short press long press dual command functionality. The SWC can always be restored to default settings
by entering the Steering Wheel Control programming menu (see page 8) and waiting 7 seconds for the interface to time out.
Alpine
JVC
Kenwood
Clarion
Pioneer
Sony
Fusion
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Track Up
Track +
Track +
Track +
Track +
Track +
Track +
Track Down
Track -
Track -
Track -
Search -
Track -
Track -
Track -
Mode
Source
Source
Source
Source
Source
Source
Source
Voice
Voice
Mute
Mute
VR
VR
VR
Power
Back
Preset
Preset
Disc -
End
Preset
Reject
N/P
Default SWC Button Assignments
Part 5: RPK4-HD1101 Settings Menu
Optional Steering Wheel Control Programming
If you wish to re-assign the SWC functions or utilize short press long press dual command functionality, the interface must be programmed in the
VSHFL¿FRUGHUVKRZQLQWKHFKDUWRQWKHQH[WSDJH
If you come across a function in the chart that your steering wheel does not have, or you do
not want to program, press and release the rear defrost
button to skip that function.
7KH/('ZLOOÀDVKRIIDQGRQFRQ¿UPLQJWKDW\RXKDYH
successfully skipped that function and are ready to proceed to the next one.
Short Press Long Press Dual Command Functionality
This feature allows you to assign two aftermarket radio functions to each of the vehicle’s SWC buttons. It can be used with as many of the buttons
as the user likes or none at all. When this functionality is implemented, quickly pressing and releasing a SWC button will initiate the short press
command, while pressing and holding a SWC button for longer than two seconds will initiate the long press command. If you wish to assign dual
command functionality to the SWC please follow the programming steps on the next page.
The following settings can be adjusted using the LCD and controls of the dash kit even after the install of the dash kit has been
completed. Each of the processes are described below, along with the combination of buttons needed to adjust the setting. The
settings available for adjustment are as follows:
1.
P
Programming of the Steering Wheel Controls
2.
P
HVAC Type
1. Coupe (2 Door) with Dual Zone Climate Controls
2. Sedan (4 Door) with Dual Zone Climate Controls
3. Coupe (2 Door) with Single Zone Climate Controls
4. Sedan (4 Door) with Single Zone Climate Controls
5. Coupe (2 Door) with Dual Zone Climate Controls (Hybrid*)
6. Sedan (4 Door) with Dual Zone Climate Controls (Hybrid*)
* Hybrid modes are a combination of Dual and Single Zone Climate controls.
3.
P
Steering Wheel Control Re-calibration
4.
P
Temperature Unit
1. Fahrenheit (Default)
2. Celsius
5.
P
Driver Position
1. Left Hand Drive (Default)
2. Right Hand Drive
6.
P
Temperature Rotary Knob Position
1. Left Hand Drive (Default)
2. Right Hand Drive
7.
P
Reset
1. Exit (Default)
2. Reset
8.
P
Upper Display Screen Type
1. Type 1 (2003 - 2004)
2. Type 2 (2004 - 2007)
P1. - Programming Steering Wheel Controls
