Complete Radio Replacement Kit with
Integrated Climate Control Retention for
2003-2007 Honda Accord
RPK4-HD1101
P
ifi A
C
ti
Page 1
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Rev: V8
Date: 081318
Parts List
This kit contains:
1.
Dash Kit
a.
1
(x1) HVAC Control Panel
b.
1
(x2) Radio Mounting Brackets (One left and one right)
c.
1
(x1) Pocket (For single DIN applications)
d.
1
(x8) Radio Mounting Screws
2. Lower Pocket
3. Climate and Steering Wheel Control Interface Module
4. Adapter for Vehicles Equipped with the Factory Navigation Radio
5. HVAC Knob Inserts (Single Zone and Dual Zone)
6. Radio Connection Harnesses
7. 1 Sheet of HVAC Duct Sealing Material. (Used when the factory foam
has deteriorated between the ducts behind the radio.)
8. USBDMA3 - USB extension for use with the aftermarket radio
Overview
The RPK4-HD1101 is a complete radio replacement kit with integrated climate control retention for the 2003-2007 Honda Accord. This kit
utilizes a user friendly pair of HVAC control knobs for a factory look and experience. Using the supplied interchangeable inserts, this kit is
compatible with both single zone and dual zone HVAC systems. This kit is also programmable for use in both left hand drive and right hand
drive vehicles. The included radio replacement interface will retain factory steering wheel controls (SWC) and allows you to program two
radio functions to each SWC button by using short press long press dual command functionality. The interface also provides data bus driven
outputs such as vehicle speed sensor (VSS), reverse trigger and parking brake.
Table of Contents: Page:
1. Factory Radio Removal ----------------------------------------------------- 1-2
2. Sub-Dash Preparation Sealing the Air Ducts------------------------------ 3
3. Radio Replacement Installation and Wiring Instructions-------------- 3-4
4. Kit Assembly Instructions -------------------------------------------------- 5-6
5. Settings Menu (including SWC programming)------------------------- 7-10
1. This version of instructions are
ONLY
intended for use with product version
R.2.1.2.13
or later.
2. The Pink / Black data input wire only needs to be connected in vehicles equipped with single zone climate controls. See page 6 to identify the
HVAC system in the vehicle.
3. The White / Black navigation SWC input wire only needs to be connected in vehicles equipped with the factory navigation radio, and when the
supporting “Voice” and “Back” steering wheel controls are present.
4.
7KH+9$&FRQWUROSDQHOZLOOQHHGWREHSURJUDPPHGWRWKH9$&V\VWHPLQWKHYHKLFOH8SRQSRZHULQJWKHSDQHOXSIRUWKH¿UVWWLPH
it will enter this programming mode. Please see page 6 for proper selection.
5.
$SRFNHWKDVEHHQSURYLGHGWRUHSODFHWKHIDFWRU\SRFNHWEHORZWKHUDGLR7KHSRFNHWFRPHVZLWKDFXWRXWVL]HGVSHFL¿FDOO\IRUXVHZLWKWKH
included PAC USBDMA3.
Important Notes
1a.
4.
1d.
7.
1c.
3.
1b.
5.
6.
2.
The RPK4-HD1101 includes everything you need for a professional installation of an aftermarket radio in your Accord.
8.
***Please check all functions of the factory steering wheel controls and HVAC system and make sure it is all
in good working order before proceeding with this install.***
