QSM-6505A Manual
6
4.
Features
Up to 5 channels (zone)
6 selectable input s MIC 1 (First Priority)
2 “High Level” input (included in 6 selectable input source).
Bass, treble, and volume control for each channel
Voice priority function on MIC. 1
Overload, over temperature, and speaker short protection.
8 ohm, 70V, and 100V output
AC and DC power in
2U height
19” rack or table mounted
5. Power Source
AC Power Source
The supply transformer has been designed for use on either 115V or 230V, (50-60Hz),
selected by a push switch on the rear panel. The amplifier is factory set at 230Vac mains
voltage.
DC Power Source
Battery Connection (24Vdc)
When using external batteries, ground the amplifier via the screw terminal. (Electrical
stability of the system will be improved by providing a good earth ground.) When
connecting batteries please ensure correct polarity.
6. Connection
Microphone Connection
Mic1~2 inputs are unbalanced standard 1/4” Phone Jack.
Mute Function
Priority Microphone, Mic1 input has VOX priority over CH 1~5. Press the push switch of
each channel on the front panel to mute the corresponding signal source.