P1PE P5200MT, Руководство пользователя

Страница: 23 / 32

7 MAINTENANCE
Maintenance schedule.
System/
Component
Procedure Each use
Every
25
hours
Every
50
hours
Every
100
hours
Note
Eng
in
e
Fuel leaks and spillages Wipe out ○
Fuel tank, air and fuel
filter
Inspect/clean ○ ○
Replace as
required
Idle adjusting screw See idle adjustment ○
Replace
carburetor
as required
Spark plug Clean and adjust ○
Re-gap to
0.6 to 0.7
mm – or
replace
Cylinder fin intake air
cooling vent
Clean ○
Exhaust, spark arrester
and cylinder exhaust
port
Clean ○
Shaft
Throttle trigger STOP
switch
Check operation ○
Cutting parts Replace as required ○
Transmission Grease ○
Screws/nut/bolts Tighten and /or replace
○
○
Not
adjusting
screws
Cutting attachment
guard
Make sure it is attached
○
Cuttin
g
u
ni
t
Oiling port Clean
○
Guide bar Clean
○
Sprocket
Inspect and replace as
required
○
Saw chain Inspect and sharpen. ○
Make sure that the engine has been stopped and allowed to cool down
before carrying out any maintenance.
Contact with hot and/or moving parts may cause personal injury.
All maintenance operations - except those listed in the
operating instructions, must be performed by qualified service personnel
23