Page | 11
CUTTING HEIGHT ADJUSTMENT:
A)
The cutting height adjuster is located above the rear right wheel.
Apply outward pressure to disengage the lever from the rack. Move lever forward or back to
adjust the height.
HANDLE HEIGHT ADJUSTMENT:
A) Pull the locking levers open on both sides of the handle.
B) Adjust the angle of the handle by raising or lowering as required. The angle can be adjusted
in 20º increments.
C) Push the locking lever closed to securely connect the lower handle to the upper handle.
STARTER HANDLE:
A)
Move the starter handle from the engine to the rope guide.
