12
ASSEMBLY
• Place generator on a level surface.
• Remove screws and then remove the outer casing cover.
(You must remove the spark plug cover to push the side
panel off from the inside)
• Remove the crankcase dipstick.
• Insert a funnel into the crankcase dipstick hole and carefully add the specified amount of 4-Cycle engine oil (SAE 10W-
30) to empty reservoir until or oil reaches the outer edge of the oil fill hole (crankcase dipstick hole).
• Be sure to replace dipstick and securely tighten before attempting to start the engine.
• To check oil, set generator on a level surface, wipe dipstick clean, then reinsert dipstick without re-threading.
Recommended Oil:
SAE 10W-30
Oil Capacity:
0.35L (0.924Gal)
generator. Always check oil level before each operation.
CAUTION!