P1 P4600SP, Руководство пользователя

Страница: 16 / 52

Assembly
Adding Oil
1. Place the lawn mower on a flat level surface
and unscrew the dipstick.
2. Remove the oil filler cap and wipe the
dipstick clean.
3. Refit the dipstick without screwing it down.
4. Remove the dipstick and check the oil level.
It should be up to the upper mark on the
dipstick. DO NOT overfill. The oil level should
not be above the upper mark on the dipstick.
5. If the oil level is too low, add SAE 30 engine
oil part number ‘600MLSAE30OIL’ or 15W40
engine oil, to the upper mark on the dipstick
(as shown above).
6. Once the correct amount of oil has been
added, refit the dipstick securely.
If you do overfill, you can remove some oil by
gently tiling the machine on its side and
pouring the excess oil into a suitable
container or use an oil syringe.
NOTE - All machines are pre delivery
inspected so there may be some residual oil
left in the machine so please fill with caution.
Adding Fuel
CAUTION - ALL FUELS ARE FLAMMABLE
ALWAYS
fuel and defuel in a well ventilated
area outside of buildings and away from any
possible sources of ignition.
ALWAYS wear correct, suitable and fit for
purpose Personal Protective Equipment (PPE).
Suggested items are but not limited to, safety
gloves, eye protection and overalls.
1. Place the lawn mower on a flat level surface
and remove the fuel filler cap and slowly fill
with unleaded petrol.
2. Fill the fuel tank with fresh straight unleaded
petrol. DO NOT fill the tank right to the top but
leave a 25mm gap between the top of the fuel
tank and the fuel filler cap.
3. Refit the fuel filler cap securely and clean up
any fuel split before starting the engine.
DO NOT overfill. The fuel tank only needs to
contain enough fuel to complete the days
mowing. If you run out of fuel, refilling must
only be done once the engine has cooled
down. Fuel stored within the machine for 28
days or more can go stale and should be
drained before further use.
16