P1 P3500PWA, Руководство пользователя

Страница: 15 / 28

OPERATION
1
5
Stopping Pressure Washer (See Fig 12)
• Turn the on/stop switch to the OFF position.
• Turn the fuel valve to the OFF position.
• Turn off water and squeeze the trigger handle to release all water pressure.
FIG 12
Using the Spray Gun (See Fig 13 - 14)
• Flip the lock tab behind the trigger up or down until it clicks to apply or remove the safety. Pull back on the trigger to
begin operating pressure washer.
•
FIG 13 FIG 14
WARNING!
Pull cord recoils rapidly and pulls arm towards engine faster than you can let go which
could result in injury.
• Always relieve pressure from spray gun before pulling starter cord, including every failed attempt to start engine.
• To avoid recoil, pull starter cord slowly until resistance is felt, then pull rapidly.
LOCK OUT
SLOT
TRIGGER
ON
OFF