P.Lindberg SS-22630, Оригинальное руководство

Страница: 41 / 47

5
MAN 9035942 EN V2
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel.: +45 70212626 6600 Vejen, Denmark E-mail: salg@p-lindberg.dk
29 Clips for position 26 8 B
30 Bolt M10 x 100 for position 10 4 B
Setting up
Necessary auxiliary material for setting up:
1. Tape measure
2. Guide cord
3. Pin
4. Approved ladders
5. Sledge hammer
6. Drill
7. Spanner
A: Post supports positioning
See diagram for approx. positioning of post supports (Fig 2)
Dimensions are approximate.
Total dimension (915 x 790 cm) measured outside on the tubes.
Post supports must be positioned precisely below the tent assembly. Start in one
corner and continue to assemble span by span.
Ensure that the diagonal dimensions are 12.05 m and that they are the same.
The dimension is measured between the middle of the tube on the end rafter to
the middle of the tube on the end rafter.