10
MAN 9063197 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600-Vejen, Denmark
E-mail: [email protected]
4.
Release the pistol and press the trigger. Water will now start to flow from the vehicle
undercarriage cleaner’s nozzles. Check that the nozzles
are not blocked and that the spray pattern is not
irregular. Replace the nozzles if there is a problem.
5.
Ensure that damaged parts are replaced and any
mechanical problems are corrected before taking the
equipment into use.
User instructions
WARNING
Do not use the vehicle undercarriage cleaner without having read and
understood all of the safety warnings and instructions contained in the user
manual. Incorrect use of the equipment can cause injury! Do not make any
changes or modifications to the equipment!
Start-up
1.
Lock the pistol trigger by moving the safety catch to a 90°
angle so that it rests against the handle.
2.
Check to make sure that all joints are secure.
3.
Release the trigger pistol and press the trigger while the
high-pressure cleaner starts. Water will now start to flow
from the vehicle undercarriage cleaner’s nozzles.
4.
Check to make sure that they are not blocked and that the
spray pattern is not irregular. If you find there are problems,
switch off the vehicle undercarriage cleaner, shut off the water
and replace the nozzles before continuing with the work.
5.
Regularly check the drainage hole on top of the swivel joint. A
little water will slowly escape from there. If it sprays out,
switch off the equipment and
replace the gaskets.
SAFETY CATCH
ACTIVATED
SAFETY CATCH
DEACTIVATED
Pressure hose
Trigger
DRAINAGE
