24
MAN 9058906 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
M.
Removing the rear guard
It may be necessary to remove the rear guard in connection with maintenance tasks. To do
this, remove the storage container and the six finger screws, as shown below.
Fig. 43: Remove the container and loosen the
screws on the right.
Fig. 44: Loosen the screws on the right.
N.
Throttle valve
The throttle valve can be set manually by turning with the fingers. In this way, the main
boom’s hydraulic system is adjusted.
Fig. 45: The throttle valve position.