![P.Lindberg 9057769 Скачать руководство пользователя страница 79](http://html1.mh-extra.com/html/p-lindberg/9057769/9057769_original-manual_3096286079.webp)
16
MAN 9057769 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
E-mail: [email protected]
Blade inspection and sharpening:
If the blade is worn, cracked, bent, or damaged, replace with a new blade immediately
before using the mower.
Use only genuine original spare parts, as substitute blades may not meet
the specifications and could be dangerous.
When sharpening the blades, sharpen only the cutting edges and try to maintain the
original angle of the blade. Do not make the cutting edge “razor sharp”. Remove the
same amount of material from each side of the blade in order to maintain the correct
balance.
Blade installation:
1.
Raise the front end of the mower using a jack. Make sure that the rear wheels are
blocked to prevent the machine from rolling back accidentally.
2.
Make sure that the air fins on the blade point upwards, slide the saucer washer, the
blade, and the flat washer onto the blade bolt.
3.
Install the blade bolt and tighten firmly using a box wrench.
Moving the mower without running the engine:
1.
Pull back the lever through the large hole in the engine hood until the nut is free of the
hood.
2.
Insert the lever into the small hole until the nut is free of the hood.
3.
Release the lever. Now you can push the mower.
Always let the engine cool down before attempting to move it.
Note: Before starting the mower, make sure the
parking brake is in:
Содержание 9057769
Страница 2: ......