3
MAN 9042042 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Assembly
Fit the accompanying wheels, support legs and transport handle on the generator as
shown:
Safety instructions
The generator must not be started or stopped when it is connected to electrical
equipment that is switched on. Start the engine, let it run for a couple of minutes
and then connect the electrical equipment. If the engine is to be stopped,
disconnect the electrical equipment. Next, allow the engine to run for a couple of
minutes, before stopping the engine.
It is recommended that voltage-sensitive electronic equipment is not
connected to the generator. Always comply with the safety instructions for the
equipment that is being used.
WARNING!
1. The generator must not be exposed to rain and moisture.
2. Ensure that there is safe and adequate ventilation to remove exhaust
fumes.
