8
MAN 9027882 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Disposal
Equipment with this symbol must not be disposed of along with ordinary
household waste. Electrical and electronic waste must be disposed of
separately.
Contact your local authorities to find out how to correctly dispose of the
equipment.
By disposing the equipment correctly you prevent damaging materials from entering
the environment.
Disposal of packaging
The packaging consists of cardboard and plastics which can be re-used after recycling.
Troubleshooting
Risk of personal injury or death!
If a repair is executed incorrectly it can affect the equipment’s operation. In
such cases, the user and the user’s surroundings will be in danger.
Minor faults are often enough to result in the equipment not operating correctly. In
such cases the user will be able to remedy these faults. Always refer to the
troubleshooting table below before contacting the supplier.
Problem
Cause
Solution
Pump does not operate
No power?
Check the cables, plugs,
sockets and fuse.
Motor is overheating:
-
Too high liquid
temperature.
-
Foreign bodies
causing a blockage.
Remove the cause of the
overheating.
Current relay trips.
Reset the current relay.
Contact an electrician if
the current relay trips
again.
Motor defect.
Contact an authorised
workshop.
