P.L.LIGHT SYSTEMS HORTILED Top, Руководство пользователя и инструкция по установке

Страница: 6 / 12

6
3 PRECAUTIONARY MEASURES AND
SAFETY INSTRUCTIONS
WARNING
• Always adhere to the local and national building and
electrical codes when installing or using the fixture.
• Switch off the mains voltage before commencing
installation or maintenance work.
• Do not open or disassemble the fixture, it contains
no serviceable parts inside. Opening the fixture can
be dangerous and will void the warranty.
• Never look directly into the light source whilst fixture
is turned on. Doing so can cause damage to the eyes.
ATTENTION
• The end user is responsible for ensuring correct
installation and use of the product. Incorrect
installation can cause damage or defects to the
product. The warranty shall become void if the
product and/or electronic components are damaged
due to incorrect installation.
• The performance of the fixture may be
compromised if operated outside of the
recommended ambient temperature guidelines.
4 INSTALLATION
4.1 PREPARATIONS FOR INSTALLATION
1 Switch off the mains voltage.
2 Refer to your light plan. Arrange boxed light
fixtures on floor in specified mounting locations.
3 Remove the fixture from the packaging and check
the contents (see section 2.2).
WARNING
Set the fixture down with the glass lens facing
down on a cushioned surface to prevent damage.
4 Gather any additional tools and/or hardware that
may be required to mount the fixture.
4.2 INSTALLING THE FIXTURE
STEP 1: MOUNT FIXTURE
The fixture can be mounted to the roof structure in
one of three possible ways:
OPTION A
1 With one person supporting the fixture on
either end, raise the fixture so that it sits flush
beneath the track/truss.
2 Lower one of the supplied mounting brackets
over the top of the track/truss at either end of
the fixture. Insert the open ends of the bracket
into the mounting channel.
3 While still supporting the fixture from below, push
down on brackets until they clip firmly in place.