P.I.T. PST20H-15, Руководство пользователя, Страница: 6 / 24

Cordless Stapler
5
English
Safety Notes
General Power Tool Safety Warnings
WARN I N G
Read all safety warnings
and all instructions.
Failure to follow all instructions listed below
may result in electric shock, fi re and/or seri-
ous injury. The term “power tool” in all of the
warnings listed below refers to your mains
operated (corded) power tool or battery oper-
ated (cordless) power tool.
Work area safety
►
Keep work area clean and well lit
. Clut-
tered or dark areas invite accidents.
► Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ig-
nite the dust or fumes.
► Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
Electrical safety
► Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce risk
of electric shock.
► Avoid body contact with earthed or
grounded surfaces, such as pipes, radi-
ators, ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
► Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
►
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the
risk of electric shock.
Personal safety
► Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influ-
ence of drugs, alcohol or medication.
A moment of inattention while operating
power tools may result in serious personal
injury.
►
Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appro-
priate conditions will reduce personal inju-
ries
.
► Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in person-
al injury.
► Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unex-
pected situations.
►
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
►
If devices are provided for the connec-
tion of dust ex- traction and collection
facilities, ensure these are connected
and properly used. Use of dust collection
can reduce dust-related hazards.
Power tool use and care
► Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job bet-
ter and safer at the rate for which it was
designed.
► Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
► Ensure the switch is in the off position
before making any adjustments, chang-
ing accessories, or storing power tools.
Such preventive safety measures reduce
the risk of starting the power tool acciden-
tally.
► Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
► Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other con-
dition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power
tools.
► Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
► Use the power tool, accessories and