P.I.T. PSP400-C1, Руководство по эксплуатации

Страница: 6 / 22

Square Sander
5
► Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments ,changing accessories, or stor-
ing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally .
► Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
►
Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other con-
dition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use.
Many accidents
are caused by poorly maintained power
tools.
► Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
► Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for oper-
ations diff erent from those intended could
result in a hazardous situation.
► Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
Service
► Have your power tool serviced by a
qualifi ed repair person using only iden-
tical replacement parts. This will ensure
that the safety of the power tool is main-
tained.
Safety Warnings for Sander
► Hold the power tool firmly with both
hands and make sure you have a stable
footing. The power tool can be more se-
curely guided with both hands.
► Only use the power tool for dry sand-
ing. Water entering a power tool will in-
crease the risk of electric shock.
► Warning: Danger of fire! Avoid over-
heating the workpiece and the sander.
Always empty the dust collector before
taking a break from work. Sanding dust
in the dust bag, microfi lter, paper bag (or
in the filter bag or vacuum cleaner filter)
can spontaneously combust under certain
conditions, for example if fl ying sparks are
created when sanding metals. This risk is
increased if the sanding dust is mixed with
paint or polyurethane residue or with other
chemical substances and if the workpiece
is hot as a result of prolonged work.
► Clean the air vents on your power tool
regularly. The motor’s fan will draw the
dust inside the housing and excessive ac-
cumulation of powdered metal may cause
electrical hazards.
► Secure the workpiece. A workpiece
clamped with clamping devices or in a vice
is held more secure than by hand.
► Always wait until the power tool has
come to a complete stop before placing
it down.
Product Description and Specifi-
cations
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fi re and/or serious injury.
Intended Use
The power tool is intended for dry sanding of
wood, plastic,metal, filler and varnished sur-
faces.
Product Features
The numbering of the components shown re-
fers to the representation of the power tool on
the graphic pages.
(1) Orbital stroke rate preselection thumb-
wheel
(2) On/off switch
(3) Complete dust box (Microfi lter system)
(4) Clamping lever
(5) Sanding plate
(6) Front clamping bracket
(7) Handle (insulated gripping surface)
(8) Sanding sheet
(9) Extraction outlet
(10) Dust extraction hose
Technical Data
Model PSP400-C1
Rated voltage 220 V~/50 Hz
Rated power 400 W
Rated no-load speed 6000-11000 spm
The size of the grind-
ing base
230X115 mm
(4-1/2"X9")
Weight 2.6 kg