P.I.T. Professional GSH65-C5, Руководство по эксплуатации

Страница: 7 / 20

Demolition Hammer
6
idle for a few minutes to warm up the lubri-
cation of the mechanisms.
► During operation, do not place the chuck
close to the surface and do not immerse
it in the ground. Otherwise, the tool may
become clogged with dirt and fail.
Sharpening Chisels
Only sharp chiselling tools will produce good
results, therefore
sharpen your chiselling tools in good time
before use. This will ensure a long service life
for the tools and good work results.
Resharpening
Grind chiselling tools against sanding discs,
e.g. aluminium oxide, under a steady stream
of water. Take care that no annealing coloura-
tion appears on the cutting edges; this impairs
the hardness of the chiselling tools.
Maintenance and Service
Maintenance and Cleaning
► Unplug the power tool before handling
any power tool.
►
After finishing work, clean the chuck,
power cord, hammer body and ventila-
tion openings from dust and dirt.
► Remove the rig and clean it of dirt and
grease.
►
Check the tightness of the threaded
connections periodically, tighten all
loose connections if necessary.
Service
► Have your power tool repaired only by
qualifi ed personnel and only with origi-
nal spare parts. This ensures the safety
of the power tool.
The list of authorized service centers can be
viewed on the offi cial website of P.I.T. by the
link: https://pittools.ru/servises/
Storage and transportation
Store the instrument in closed rooms with
natural ventilation in a package at an air
temperature of 10 ° C to + 50 ° C and an air
humidity of no more than 80%.
Products can be transported by any type of
closed transport in the manufacturer’s pack-
aging or without it, while preserving the prod-
uct from mechanical damage, atmospheric
precipitation. Remove the battery and replace-
ment tool from the tool before transporting.
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials
must be recycled and reused in an envi-
ronmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The fi rst 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confi rms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certifi cates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is
12months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
warranty:
1. In the absence of any valid legal documents
(invoices) such as warranty certifi cates
and warranty cards to prove the date of
purchase.
2.Damage caused by natural wear and
overload. (For example, motor rotor and stator
failure caused by overload, scorching or