Page | 3
1.
Introduction
Thank you for purchasing the P.Audio SB218 and for your faith in us and our products. This product
will provide you many years of useful service with proper use and care. Please read this manual
completely and become familiar with the design and operation of this advanced active speaker
system.
The SB218 was designed to provide easy to use, powerful low frequency sound reinforcement with
extremely deep response and on board amplification.
Ease of use with on board amplification and DSP Presets.
High output from the lightweight neodymium transducers.
Reliable amplification from PASCAL.
2.
Specifications
Specification
SB-218
General
Specifications
Type
Active Subwoofer
Woofer Size
18”x2
Woofer Voice Coil
4”
HF Size
N/A
HF Voice Coil
N/A
Cabinet design
Plywood
Handles
3 on each side
Pole Mount
M20 Socket
Weight
97 kg / 213.8 lbs
Dimensions(HxWxD)
637x1207x846.3 mm / 25.1x47.5x33.3 in
Acoustic
Specifications
Sensitivity (1w/1m)
N/A
-3dB Response
45Hz-100Hz
-10dB Response
30Hz-110Hz
Maximum
Continuous SPL
135dB (1m, 1 cabinet)
Maximum Peak SPL
138dB
(1m, 1 cabinet)
Dispersion
Essentially Omnidirectional
Electrical
Specifications
Impedance
N/A
Input
Line Level XLR
Thru
Line Level XLR
System Level Control
Gain Control
Power Output
1500w+1500w @ 1% THD
Amplifier Type
Class D with SMPS
Protection
Turn on delay; Short circuit protection;
DC Voltage protection; Peak Voltage
Limiter; Over Temp Protection
Indicators
Power On, Limiter Active, Signal Present
