4
ASSEMBLY INSTRUCTIONS
STEP 1: CHOOSE THE SITE
STEP 2: UNPACK THE GAZEBO
STEP 3: FITTING THE GAZEBO CANOPY
HELPFUL HINT
After unpacking the Gazebo, use the
check list on page 3 to identify all parts
and make sure all parts are present. It
is important to fit the canopy correctly to
the frame to reduce the chance of water
ponding during heavy rain. See page 10
for instructions.
HELPFUL HINT
It is not necessary at any stage of
assembly to apply more than a small
force on the frame. If a small force is not
sufficient to carry out each described
step, then re-align the frame and try
again.
PLEASE NOTE
Although this Gazebo requires no frame
assembly and set up is very quick, it
requires two people to lift and erect
safely. Avoid placing hands near the
pinch points of the scissor-action struts
during setting up or packing away the
Gazebo frame. To prevent damage it is
important not to drop the gazebo frame.
Select a sheltered level site protected from
the wind. Clear away all stones, twigs, etc.
Remove the Gazebo frame from the carry
bag. With the assistance of at least one other
person stand the compressed Gazebo frame
on its feet facing the desired position.
Standing at diagonally opposite corners,
slowly expand each leg making sure the
scissor-action struts open evenly and
smoothly. It will be necessary to move from
leg to leg during the opening of the Gazebo.
If the strut seems stiff, do not force the
Gazebo frame, check and make sure that you
are opening the Gazebo frame square and
evenly. Please take care the Gazebo feet are
not catching on the ground preventing a
smooth opening operation. Continue to
expand the Gazebo frame until almost fully
expanded as indicated in Figure 1.
When the Gazebo is nearly fully expanded
remove the Gazebo Canopy from the carry
bag and place it over the roof frame of the
Gazebo as indicated in Figure 2. Now secure
the Canopy to the Gazebo by attaching the
Velcro points at the top of the legs as
indicated in Figure 3.
Figure 1
Figure 2
Содержание MPG-GD30C-B
Страница 18: ...18 SPARE PARTS AND REPAIR PROCEDURES Figure 22...